← All posts

Skills assessment cost Australia UK applicants pay: from £265 to £785 depending on your job

Tips · 2026-11-17 · 8 min read

A smiling British welder holds a finished steel bracket with both hands in a bright Australian fabrication workshop.

Skills assessment cost Australia UK applicants face starts at a fixed $795 for Trades Recognition Australia's Migration Skills Assessment and runs to $1,498 for an ACS General Skills assessment for IT. At the Reserve Bank rate of 0.5238 pounds per Australian dollar on 22 October 2026, that is roughly £416 to £785 before any extras. Which fee is yours depends on your trade or profession, not on your passport, so the first job is to find the right assessor.

Why the fee depends on your job, not your passport

A skills assessing authority checks that your skills meet the standard it sets for an occupation, and Home Affairs only accepts an assessment from the authority named for your occupation. Each authority has its own procedures, timeframes and charges, so there is no single UK price.

Your British passport settles the English question for many Australian visas, because Home Affairs accepts a valid UK passport as evidence of Competent English and Functional English. It does not settle your trade. We explain that split in Skills assessment for Australia from the UK: your passport covers English, not your trade.

Not everyone needs an assessment at all. Home Affairs says some primary subclass 482 applicants must have a mandatory one, and it must be started before the visa application is lodged or the application is not valid. Check the occupation on the official list before you spend anything.

The fees we can verify, converted to pounds

These are the official Australian-dollar figures from each body's own pages, converted at the 22 October 2026 rate. The pound amounts are rough comparisons only: exchange rates change daily, and your bank will add its own margin.

AssessmentFee in Australian dollarsRoughly in pounds
TRA Migration Skills Assessment (trades)$795£416
ACS General Skills (IT)$1,498£785
ACS Recognition of Prior Learning or Qualification Only (IT)$625£327
Engineers Australia Competency Demonstration Report$940 excluding GST£492
Engineers Australia Washington, Sydney or Dublin Accord qualification assessment$505 excluding GST£265

ACS also lists a Post Australian Study assessment at $1,136, which is aimed at people who studied in Australia rather than workers applying from the UK. Engineers Australia adds GST to its fees: $1,034 for the standard Competency Demonstration Report and $555.50 for the accord assessment, and a fast-track option costs $360 ($396 with GST) on top.

Trades: TRA's programmes and what is not priced

For trades, Trades Recognition Australia (TRA) runs several programmes, and which one applies depends on the occupation and the country. TRA's Migration Skills Assessment page says the total cost of that programme is $795, paid through its Online Portal. It is a documentary assessment for occupations and countries not covered by TRA's other programmes, and it is not for 482 or 485 applicants.

We could not confirm a fee figure for TRA's Offshore Skills Assessment Program (OSAP) or its Temporary Skills Shortage program, so we are not quoting one. OSAP is run with Registered Training Organisations, so ask the organisation for its current charge in writing before you commit. TRA says the OSAP outcome arrives approximately 15 weeks after complete evidence is submitted, and the Temporary Skills Shortage outcome approximately 9 weeks.

The United Kingdom is on the OSAP country list for trades including Chef, Cook, Baker, Hairdresser, Pressure Welder and Metal Fabricator, but not for Carpenter, Bricklayer, Motor Mechanic (General) or Welder (First Class). Our guide to OSAP for UK trades goes through the three lists. Electricians and plumbers have a different hurdle again, which UK electrician moving to Australia explains.

Whichever route applies, TRA does not award Australian qualifications, occupational registrations or licences. A pass helps your visa file; it does not let you pick up the tools on a site where a state licence is required.

IT and engineering: ACS and Engineers Australia

For software and IT roles, the ACS fee depends on your evidence. The General Skills assessment is for people with a qualification, overseas or Australian, plus at least 2 years of experience. The Recognition of Prior Learning route needs at least 6 years of experience, and the Qualification Only route is for people whose degree is the main evidence. Both of those cost $625, which is why the evidence you hold can change the bill by roughly £458. If you work in tech, browse IT and technology jobs to see what employers list.

Engineers Australia charges by route. A standard Competency Demonstration Report costs $940 excluding GST, while an accord qualification assessment costs $505 excluding GST. We could not confirm which route a UK engineering degree falls under, so read Engineers Australia's own signatory list before choosing.

The same dollar fee takes a very different share of income in different countries. JobsAbroad Bangladesh's ACS guide shows the same two pathways from a Bangladeshi reader's side, which is a useful way to see how the options compare.

What the fee does not cover

The assessment fee is rarely the whole cost. Budget separately for the following, none of which we can price from official pages:

  • Certified copies of qualifications and references from past employers.
  • Legalisation of UK qualifications, which gov.uk says you may need through the British Council or the Legalisation Office.
  • A state licence or occupational registration if your trade needs one.
  • The visa application charge, which is separate again. See the cost of moving to Australia from the UK for the visa side.

Visa charges also went up on 1 July 2026, so read what the visa fee rise means for your budget alongside this. Your training may also need evidence of what it covers: why a UK apprenticeship certificate alone may fall short shows what assessors look for.

How to work out your own assessment bill

  1. Find your occupation and its assessing authority in the combined list of eligible skilled occupations on the Home Affairs site.
  2. Open that authority's own fees page and note the exact fee for the route that matches your evidence.
  3. Check whether your visa pathway needs the assessment at all, and when it must be started. The Skills in Demand (482) visa guide sets out the 482 rules.
  4. Convert the fee on the day you pay, and add your bank's charge for sending money abroad.
  5. Add the costs of documents, certification and any licence, then keep a spare buffer in case the assessor asks for more evidence.
  6. Note the validity: an assessment with no validity period shown is valid for 3 years from the date of issue, so time it with your plans.

If you want to see how your existing qualifications could be recognised, RPLDirect explains skills recognition for tradespeople.

Common mistakes with skills assessment costs

  • Paying a "fast-track" agent. Real assessors publish their fees on their own sites. Anyone asking for a large extra sum to make sure you pass is a warning sign.
  • Quoting a fee from an old forum post. Fees change, so use the assessor's current page.
  • Booking the wrong programme. Choosing a programme that does not cover your occupation and country wastes the fee.
  • Leaving the assessment too late. For a mandatory 482 assessment, it must be started before the visa application is lodged.
  • Forgetting that GST applies. Engineers Australia shows prices both ways, and the higher one is what you pay.

Frequently asked questions

How much is a skills assessment for Australia from the UK?

It depends on your occupation. TRA's Migration Skills Assessment is $795, ACS assessments for IT run from $625 to $1,498, and Engineers Australia charges $505 or $940 excluding GST depending on the route.

Can I pay the assessment fee in pounds?

The official fees are set in Australian dollars. TRA says its fee is paid through its Online Portal, so check each assessor's payment page to see how your card or bank will convert the amount.

Do I need a skills assessment as a UK passport holder?

Not always. Some primary 482 applicants need a mandatory assessment, and points-tested visas need a suitable one by the time you are invited to apply. Your passport covers English evidence for many visas, but it does not replace the trade assessment.

How long does an assessment last?

Home Affairs says an assessment with no validity period shown is valid for 3 years from the date of issue. For a mandatory 482 assessment, it must have been undertaken or commenced within the 3 years before the application.

Is the assessment fee refundable if I fail?

We could not verify a refund policy for any of these assessors, so read the terms on the assessor's own page before you pay. Do not assume a fee comes back.

Key takeaways

  • The fee depends on your occupation's assessor, not your UK passport.
  • TRA's Migration Skills Assessment is $795, roughly £416 at the 22 October 2026 rate.
  • ACS fees range from $625 to $1,498 depending on your evidence.
  • Engineers Australia's headline prices exclude GST.
  • Budget for documents, certification and licences on top, and get OSAP prices from the training organisation.

#skills assessment cost australia #tra assessment fee #acs assessment cost #engineers australia cdr fee #skills in demand 482 visa #move to australia from the uk #trades recognition australia #british tradespeople

Keep reading

All articles